2000 Pumps

Title: 2000WA - Close Coupled Design
Date Posted: Tuesday, 20 March 2012 13:29

The 2000WA close coupled pump is specifically designed for lower pressure, lower flow applications that do not require the full features and benefits of the 2000G1 pump. The 2000WA features a close coupled design that has integral bearings that support the radial thrust loads that can be seen at the rotor/stator. This design reduces the overall stress that can occur in the gear reducer.

The 2000WA is specifically designed for applications that require the transfer of highly viscous fluids and solids where a close coupled configuration is preferred, but the robustness of a gear joint is desired.

Features and Benefits

  • Close coupled bearing housing design
  • Bearings integral to adapter housing
  • Uses standard size / keyed gear reducer shaft
  • Sealed gear-type universal joint drive train

Typical Applications

  • Municipal Wastewater Treatment
  • Pulp and Paper
  • Oil and Gas
  • Food Waste
  • Petrochemical

Title: 2000WB - Close Coupled Design
Date Posted: Tuesday, 20 March 2012 13:47

The 2000WB close coupled pump is specifically designed for lower pressure, lower flow applications that do not require the full features and benefits of the 2000G1 pump. The 2000WB model features a traditional close coupled design where the loads are supported by the gear reducer bearings. This design reduces the overall stress that can occur in the gear reducer.

The 2000WB is specifically designed for applications that require the transfer of highly viscous fluids and solids where a close coupled configuration is preferred, but the robustness of a gear joint is desired.

Features and Benefits

  • Traditional close coupled design
  • No shaft bearings
  • Thrust and radial loads supported by the bearings in the gear reducer

Typical Applications

  • Municipal Wastewater Treatment
  • Pulp and Paper
  • Oil and Gas
  • Food Waste
  • Petrochemical

Title: G2 - Single Auger Feed
Date Posted: Tuesday, 20 March 2012 13:55

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership.

Fluid Type

Viscosity and solids where open inlet is required

Fluid Supply

  • Via wide open-throats and chutes
  • Capable of varying length to match wide feed areas from centrifuges and 1, 1.5, and 2-meter length belt filter presses

Benefits

  • Single auger feed mechanism to stuff product into the pump elements for increased fill efficiency
  • Wide open-throat minimizes plugging that could occur in a standard inlet

Typical Applications

  • Heavy clay slurries
  • Gypsum
  • Grout
  • Grape must
  • Municipal GBT sludge
  • Municipal sludge to 15% solids
  • Thick industrial sludges

Title: G1 - Flanged Design
Date Posted: Tuesday, 20 March 2012 13:52

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership.

Fluid Type

Broad range of viscosities and solids

Fluid Supply

Via standard pipe

Benefits

Best value for majority of applications

Typical Applications

  • Oil
  • Polymers
  • Municipal sludge to 10% solids
  • Titanium Dioxide
  • Paper coatings
  • Mining Slurries

2000openpump


Title: G3 - Bridge Breaker
Date Posted: Tuesday, 20 March 2012 13:58

High-performance 2000 Pumps offer low maintenance, minimal downtime and long service life for low total cost of ownership.

Fluid Type

Medium- to high-viscosity and solids where product bridging is a concern

Fluid Supply

  • Via wide open-throats and chutes
  • Capable of varying length to match wide feed areas from centrifuges and 1, 1.5, and 2-meter length belt filter presses

Benefits

  • Independently driven Moyno bridge breaker has the flexibility to operate at different RPM from the pump
  • Single auger feed mechanism to stuff product into the pump elements for increased fill efficiency
  • Wide open-throat minimizes plugging that could occur in a standard inlet

Typical Applications

  • Pharmaceutical pastes
  • Heavy petroleum sludges
  • Plasticizers
  • Municipal sludge in excess of 30% solids
  • Paper stock in excess of 12% solids

More Articles...

  1. G4 - 45 Inlet Design
FaLang translation system by Faboba

This website uses cookies to ensure you get the best experience on our website.